Student_Follow Me Printing

1. Approach the copier and enter your username and password.

Username and Password Entry

2. Open

   

   3. You will now see your Papercut Follow Me options, including your print release queue and notification of any pending print jobs. When you are finished press the "Log out" button in the top right.

3. Tapping 'Print Release' will take you to the print release menu. Here you will see your pending print jobs and can adjust your print job settings.

4. To print your document, check the box to left of the document name and then select print in the bottom right corner.

Open

2. To access the print settings, click the sideways arrow to the side of your print job. Below is an example of what the print jobs settings will look like. You can also print from the settings page.

1. Tapping 'Device Functions' will take you to the old Ricoh copier screen, where you can use the old scanner feature, the copier, and the fax. Settings may also be accessed here.

2. When you would like to return to the Follow Me printing menu just click the PaperCut MF icon on your screen. You may also select the back arrow to the left of the home button at the bottom of the screen.

1. Tapping "Scan" will take you to a new scanning feature on your copier. This will open up all your scanning options you have available to you. If you find a needed option missing please contact your IT help desk.

2. In this case I am choosing to scan to my email. If you are satisfied with the document you may choose to 'Start scanning". If you would like to change the settings tap the settings button.

3. The below is an example of the settings available to you for scanning. After they are set, click start scanning.