Staff Connecting to Network Drives with a Mac

NOTE: Instructions written for MAC OS Catalina

TIP: To follow the instructions provided you must have the Cisco AnyConnect client installed. If you do not, click here for installation instructions.

Click on Go at the top left of your screen, then click on Connect to Server.

1. Type in smb://waufil3/share for the S/Share drive.

Below is what the Share drive looks like after you connect.

To access the H drive, type in: smb://waufil4.ntc.edu/employees/username.

Below is what your H drive will look like after you connect.

To connect to the Instruct/G drive, type in: smb://waufil5.ntc.edu/instruct.

Below is the instruct/G drive after it is opened.

1. To access the P/PS folder, type in: smb://waufil2.ntc.edu/ps.

Below is the PS folder after it has been opened.

1. To access the apps folder, type in: smb://waufil3.ntc.edu/apps.

2. Below is the apps folder after it has been opened.

Suggestions, comments, or concerns about this content? We can be reached at https://www.ntc.edu/helpdesk

NTC IT Knowledge Base

Staff Connecting to Network Drives with a Mac

Analytics

Related content